651-432-4050 Sales@StPaulSign.com

Decorative Bollard Covers

Looking for Decorative Bollard Covers For Sale in Minnesota? You’ve come to the right place. You may order them and have them shipped to you, or you can hire us to bring them and install them too.

Decorative Bollard Covers are a cost-effective way to improve your facility’s appearance without the costly install of stainless steel, iron or concrete bollards. We offer a wide selection of Decorative Bollard Covers to fit a variety of post sizes.

Existing Pipe Bollards: If your bollard pipes are too small for the desired cover, we have steel inserts to adapt a smaller pipe to a larger cover.

New Pipe Bollards: If you are going to be installing new steel pipe bollards, and want them to look great, then you can choose your cover, and then spec the optimal pipe size to your installer, whether it be St. Paul Sign or someone else. In this case, you are fortunate because you can plan the entire bollard and cover system at once.

Installation is Easy

When you’ve determined your bollard cover size and style, you can request a quote using our easy online form. When you decide to buy, we’ll get heights from you, cut them for free and ship them out. Installation is just a matter of applying 2 strips of the special tape included to the pipe and sliding the cover over the pipe.

Bollard Cover Install Service for Greater Twin Cities Metro Area

If your local and you’d rather not deal with the details, we can come to you. We’ll take measurements and discuss bollard cover options. Then we can get you a quote right away.

Color Chart for All Decorative Bollard Covers

Black
Pantone 6C

Gray
Pantone 11C

402 Gray
Pantone 402C

Urbane Bronze
Pantone 2336 XGC

Brown
Pantone PQ-440C

White
Pantone 663C

Red
Pantone 187C

Orange
Pantone 173C

Yellow
Pantone 012C

Forest Green
Pantone 343C

285 Blue
Pantone 285C

4-inch Paramount Decorative Bollard Covers

The 4″ Paramount Decorative Bollard Covers are made of 1/4″ nominal wall thickness polyethylene thermoplastic (LDPE) and are offered in any color to match your building exterior or corporate branding needs. The classic design will allow you to add an affordable layer of elegance to your entryways, parking lots, or storefronts.

With a total height of 51” or 36″, the 4″ Paramount Decorative Bollards are the only decorative bollard covers that fit over 4” steel pipe diameter but only fit a max pipe height of 48″ (with flare) or 32″ (without flare).

 Ideal Shield Decorative Bumper Post Sleeves enhance the aesthetics of security posts and steel bollards. The Decorative Covers are a cost-effective alternative to expensive cast iron, stainless steel or concrete bollards.


6-inch Architectural Decorative Bollard Covers

At an overall height of 52”, Architectural Decorative Bollards fit over 6” pipes and steel inserts are available to fit smaller pipe sizes. This sturdy structure, made of 1/4″ nominal wall thickness polyethylene thermoplastic (LDPE), is available in any color.

Designed to match your building exterior or corporate branding needs, architectural bollard covers establish a sleek and striking appearance for your building exterior.

Ideal Shield Decorative Bumper Post Sleeves enhance the aesthetics of security posts and steel bollards. This is a cost-effective alternative to expensive cast iron, stainless steel or concrete bollards.


6-inch Metro Decorative Bollard Covers

With a total height of 50”, Metro Decorative Bollards fit over 6” pipe and steel inserts are available to fit smaller pipe sizes. This product is made of 1/4″ nominal wall thickness polyethylene thermoplastic (LDPE) and is offered in any color to match your building exterior or corporate branding needs.

Distinguished by the multiple horizontal rings marking the structure, the Metro Decorative Bollard can be cut to custom heights. Ideal Shield Decorative Bumper Post Sleeves enhance the aesthetics of security posts and steel bollards. The Decorative Covers are a cost-effective alternative to expensive cast iron, stainless steel or concrete bollards.


6-inch and 10-inch Skyline Decorative Bollard Covers

The 6″ Skyline Decorative Bollard is produced with a total height of 66” to the tip, fitting over 6” pipes with a max pipe height of 60″. Steel inserts are also available to fit thinner pipe sizes.

The 10″ Skyline Decorative Bollard fits a max 10-inch pipe of 51″ tall. Steel inserts are also available for thinner pipe sizes.

Skyline Decorative Bollards are offered in any color to better match any architectural structure or your corporate branding needs.

The Skyline bollard cover is made of 1/4″ nominal wall thickness polyethylene thermoplastic (LDPE) and a sleek slope tops off the modernized addition to any exterior. This sleek product can be cut to custom heights.

Ideal Shield Decorative Bumper Post Sleeves enhance the aesthetics of security posts and steel pipe bollards. These Decorative Covers are a cost-effective alternative to expensive cast iron, stainless steel or concrete bollards.


6-inch and 10-inch Cinco Decorative Bollard Covers

The 6″ Cinco Decorative Bollard Covers stand at an overall height of 52”, fitting over 6” pipe with steel inserts also available to fit reduced pipe sizes. The 10″ Cinco Decorative Bollard Covers fit over 10” pipe and steel inserts are available to fit smaller pipe sizes. This 10″ Cinco product stands at a total height of 60”. Both sizes are durable, and are made of 1/4″ nominal wall thickness polyethylene thermoplastic (LDPE), and are available in any color.

The Cinco Bollard Cover can be cut to custom heights and are available in any color and in both 10″ and 6″ sizes, Cinco Decorative Bollard Covers are designed to match any building exterior or corporate branding requirements.

Ideal Shield Decorative Bumper Post Sleeves enhance the aesthetics of security posts and steel bollards. These bollard covers are a cost-effective alternative to expensive cast iron, stainless steel or concrete bollards.


10-inch Pawn Decorative Bollard Covers

The Pawn Decorative Bollard Covers fit over 10” pipe with steel inserts also available to fit smaller pipe sizes. These commanding arrangements stand at an overall height of 49” and are made of 1/4″ nominal wall thickness polyethylene thermoplastic (LDPE).

A sophisticated design, the Pawn Decorative Bollard Cover consists of a wide base with a clean finish and a flat-topped casting. This structure can come in any color and can be cut to custom heights, fully complementing your building’s exterior or corporate branding needs.


10-inch Ribbed Decorative Bollard Covers

Our Ribbed Decorative Bollards fit over 10” pipe and steel inserts are available to fit smaller pipe sizes, standing at a total height of 48”. Available in any color, Ribbed Decorative Bollard Covers are designed to complement your building exterior or corporate branding needs.

This secure structure made of 1/4″ nominal wall thickness polyethylene thermoplastic (LDPE), can be cut to custom heights. The distinct Ribbed Decorative Bollards contain a unique ribbed effect and its widebody suits larger pipe reinforcement for superior impact protection. Decorative Bumper Post Sleeves enhance the aesthetics of security posts and steel bollards. Our Decorative Covers are a cost-effective alternative to expensive cast iron, stainless steel or concrete bollards.

Color Chart for All Decorative Covers

Black
Pantone 6C

Gray
Pantone 11C

402 Gray
Pantone 402C

Urbane Bronze
Pantone 2336 XGC

Brown
Pantone PQ-440C

White
Pantone 663C

Red
Pantone 187C

Orange
Pantone 173C

Yellow
Pantone 012C

Forest Green
Pantone 343C

285 Blue
Pantone 285C

Request a Quote on Bollard Covers Today. The Online Form is Quick and Easy!